|
|
|
Home
High Performance OEM-GPS Receivers
High performance, cost effective OEM GPS solutions designed, developed and manufactured in Europe.
The Orcam GPS-receivers, based on semiconductor technology from SiRF Technology and MediaTek, are designed to fit the needs of today's GPS-market. The compact size (GPS02: 15,9x13,1x2,15mm, GPS25/26: 25,4x22,86x3mm, GPS30: 18,0x16,0x3,0), on-board power regulation and ROM or FLASH-memory used to store software, provides the flexibility to adopt the receiver to fit most applications.
All receivers supports SBAS (WAAS, EGNOS) as standard. Some models also supports DGPS- and AGPS functionality, are compatible with SiRFXtrac® and prepared for SiRFDRive® and SiRFLoc® software. The receivers have no RF-connector, which makes them true SMD-modules that can be soldered with standard pick-and-place equipment. All Orcam GPS receivers are RoHS compliant to Directive 2002/95/EC
|
News New ROGER GPS Products GPSR-EP, GPS Repeater Easy provides a simple, low-cost solution to achieve indoor GPS coverage over an area with a diameter of 15m with the repeater placed up to 6 m from the outdoor GPS Receive antenna. (11 Nov 2009)
GPSR-SAP, Splitter & Amplifier Package contains all necessary compaonents to add an additional two Repeaters to an existing GPS Repeater installation ni order to extend the indoor GPS coverage. (11 Nov 2009)
GPSR-CIP, GPS Car Installation Package contains one repeater, an outdoor GPS patch antenna with 6m RF cabling and a 12V or 24 V voltage regulator for use in vehicles.(11 Nov 2009) Read more ...
GPS30E - Enhanced performance Improved Cold-, Warm- and Hot start acquisition sensitivity and reduced Time To First Fix are the key features of the latest GSWLT3.5.0 GPS application software used in our GPS30E. Acquisistion sensitivity has been increased by > 3 dB and TTFF has been reduced by up to 50% over a range of operating conditions.(25 May 2009)
ROGER Amplifier & Splitter The latest addition to the ROGER family of GPS Repeating products.Combining a +18 dB GPS Amplifier and a passive 1:3 splitter in the same housing the GPSR-AS Amplifier & Splitter the
Significant price reductions on our GPS3X series (27 Mar 2009) Significant reductions in manufacturing cost for our GPS3X series results in lower prices. Contact your local distributor for more information. GPS35 & GPS36, SiRFstar III performance in our GPS2X footprint  (17 Nov 2008)
Designed to be almost 100% drop-in replacements to our GPS25 and GPS26, the GPS35 and GPS36 brings significant improvement in navigation performance. Using the latest low-power version of the SiRF GSC3 GPS-receiver chip, power consumption is only slightly higher than the GPS2X series while tracking sensitivity increases by 7 - 17 dB.
New distributor in North America We are pleaed to announce that Norgay Enterprises, Ltd. has been appointed distributor for Canada & USA. Please see our Distributors & Representatives section for details. (13 Nov 2008)
Page last updated on: 11 Nov 2009
Orcam Systems providesStandard GPS receiver modules Modified Standard GPS receiver modules (software modification) Full Custom GPS receiver modules (hardware & software) Design Integration
|
OEM-GPS receivers GPS3X series
Based on the much acclaimed SiRFstar3 GPS-chip, the Orcam GPS3x series offers unparallelled tracking and navigation performance, with low power consumption in a compact format at an affordable price.
GPS2X series
Based on the SiRF GSC2x GPS receiver chip, the latest addition to SiRF's proven SiRF Star 2 family, the Orcam GPS25 and GPS26 offers high performance at an affordable price. Read more....
GPS02
32 channel OEM-GPS Receiver with up to 5 Hz position update rate Our first receiver with MediaTek's MT3318 GPS receiver chip. In addition to its 32 receiver channel architecture it is able to support position fix update rates up to 5 Hz.
|
GPS Repeaters The ROGER® GPS-repeater makes GPS reception possible in locations where direct reception of the satellite signals is impossible.
GPS satellite signals received by the external GPS receive antenna are tranmitted via cable to the GPS-repeater that reradiates the signals via it's internal transmit antenna into the desired location, like garages, workshops and other indoor or underground locations. Read more...
The ROGER® GPS-repeater kit contains - one ROGER GPS-repeater - one active GPS receive antenna for outdoor mounting - 19.5 m coaxial cable with connectors - AC Power adapter
ROGER™Component Products - ROGER® Line amplifier, for long antenna cable runs or used together with - ROGER® Signal splitter, to allow up to five repeaters to share a common outdoor receive antenna. - ROGER® Amplifier & Splitter combination unit.
Please visit the Roger GPS repeater page in the product section for more information
|
| © Orcam Systems AB. All rights reserved. Användarvillkor / User terms. Cookies. |
|